Your garage floor isn't the only concrete taking a beating. Long driveways spall, patios stain, pool decks go chalky. We coat all of it across Yorba Linda, CA — inside and out. Free on-site estimate. 10-year material and craftsmanship warranty.
Yorba Linda is a driveway town. Lots run long and deep here, and the apron between the street and the garage is usually the largest single piece of concrete on the property. It's also the one nobody thinks about until it starts to go.
Hairline cracks open up. The surface dusts off on a broom. Oil from a parked car soaks into a patch that never quite comes clean. Patios and pool decks age differently but they still age — sprinkler overspray and pool chemicals work at the surface until it chalks, and shade from mature trees holds moisture long enough to leave a slick film. Once the top layer starts letting go, a slab takes more prep than one caught early.
A coating doesn't replace your concrete. It bonds into the slab you already own and gives it a surface that can be cleaned instead of one that absorbs.
Concrete doesn't have to stay hidden under carpet. Once the old flooring is up, the slab underneath becomes the finished floor — seamless, quick to sweep, with no grout lines or seams for dirt to settle into.
What makes that worth doing is how the floor is built. Every other option is a separate material laid over your slab — tile with a grout line around every piece, carpet with its pad and its seams, vinyl plank clicking together over an underlayment. A coating isn't laid on the concrete. It's ground into it, and it cures as one continuous surface with nothing to lift, catch, or come apart at a seam.
.avif)
Metallic epoxy and solid color are the two finishes we install inside, and we can coat a single room or carry the same floor through several. Most interior jobs are measured, quoted, and scheduled off one visit.
The first floor that meets wet shoes, dog paws, and sand out of the car. A coated slab wipes clean instead of holding grit in grout lines, and there is no threshold strip to catch a toe.
Water resistant underfoot, so a tipped detergent bottle or a leaking washer is a wipe rather than a stain in the subfloor. Solid color is the usual pick, and it brightens a room that rarely has a window.
One seamless surface with nothing for crumbs, flour, or spills to sit in. Metallic reads as a design floor in an open kitchen, and solid color keeps it bright and quiet in a walk-in pantry.
High traffic, and where flooring transitions tend to look worst. A single coated run takes the joins out altogether, so there is nothing to lift, catch, or wear through down the middle.
Where metallic epoxy earns its keep. Pigment moves through the resin as it cures, so the pattern settles on site and the floor becomes the feature of the room. In a home gym it gives you a hard, level surface that cleans down in minutes.
Converted and below-grade rooms are where moisture rises through the slab. A moisture barrier primer goes down first where it is needed, so the finish is not fighting the concrete underneath it.
Three systems cover almost every home we coat. Flake goes outside, metallic goes inside, and solid color works in either when you want the floor to stay quiet. All three are epoxy and polyaspartic systems, all three go down over ground and prepared concrete, and all three carry the same 10-year warranty. What changes is the texture, the look, and where each one belongs. Tell us the room and we will tell you which one fits it.
.avif)
One even color, no movement, no pattern. It suits laundry rooms, pantries, mud rooms, and hallways where you want the concrete bright and clean rather than decorative. Low maintenance: sweep and mop, no waxing and no resealing. It is also the most straightforward of the three to install.
Our main floor system, and the one that goes outside. Color flake is broadcast into the wet epoxy, then locked under a UV-stable polyaspartic topcoat. The texture gives grip when the surface is wet and hides dust and tire marks between cleans. Pick your blend from the color chart, or we will bring samples out with the estimate.
.avif)
Our interior finish. Pigment moves through the resin as it cures, so the pattern is settled on site and no two floors finish alike. It suits living rooms, entryways, kitchens, and home gyms. Metallic colors are worth seeing in person before you choose, and we can bring them to the estimate.
A coating is only as good as the slab under it, and prep is where most of the labor on any job actually goes.
We diamond grind every surface before anything goes down, which opens the concrete so the coating bonds into it rather than sitting on top. Cracks are ground out and filled. Oil is drawn out of the slab. Spalled edges are rebuilt. Where moisture is rising through the concrete, a moisture barrier primer goes down first. We don't acid etch, and we don't coat over a slab we haven't opened up.
Skip that work and the floor lets go at the bond line. It shows up as peeling and lifting rather than a stain you can clean off — and fixing it costs more than doing it properly the first time.
That's why every residential floor we install carries a 10-year material and craftsmanship warranty. Evolve Epoxy is licensed, bonded, and insured under Lic. #1084974.
If you want to know what your own slab actually needs, call (951) 454-6688 or schedule a free estimate and we'll come look at it.
High standards protect you from low-quality experiences. We are a small, family-owned crew run by Steve Monroe, and the people who quote your floor are the people who grind, coat, and finish it. Residential work is what we do most, across Yorba Linda and the cities around it.
We open the concrete with diamond grinders so the coating bonds into the slab instead of sitting on top of it. No acid etching, and no shortcuts on the part of the job you cannot see once it is finished.
Every residential floor carries our 10-year material and craftsmanship warranty. The full terms sit on our Terms and Conditions page, so you can read them before you commit to anything.
Lic. #1084974, held in California. Worth asking any contractor for their number before work starts on your property, and worth checking that it is current.
Not a franchise and not a call center. You deal with the same small crew from the first visit through to the final coat, and you can ask them questions while they work.
We come out, measure, look at the condition of the slab, and give you a real number. No charge for the visit, no obligation, and no pressure to book on the spot.
Military, veteran, and first responder discounts are available. Ask for details when you book your estimate and we will apply it to your quote.
It comes down to three things:
1. the square footage,
2. the condition of the slab, and the finish you choose.
A spalled driveway needs far more prep than a clean laundry room, and prep is where the labor sits, so two jobs of the same size can price differently. We do not guess over the phone. We measure on site, look at the concrete, and give you a fixed number with no charge for the visit.
Call us or fill in our free quote form and we will book a time that suits you.
Plan on more than one day for refinishing an outdoor concrete floor. We grind and prep first, then coat, and the schedule follows the square footage and how much repair the slab needs. Our one-day installation applies to garage floors, not to driveways, patios, or pool decks. You get the real schedule in writing with your estimate, before anything is booked in.
Foot traffic is about 8 hours. Vehicles need longer, in as little as 48 hours on a driveway. Cure time moves with temperature, so we confirm the timing for your job on the day rather than guessing in advance, and we tell you when furniture, cars, and patio furniture can go back.
Yes. Once the carpet, tile, or vinyl is up, we coat the slab underneath. Metallic epoxy is the popular choice for living rooms, entryways, and kitchens. Solid color suits laundry rooms, pantries, mud rooms, and hallways. Both give you a seamless floor with no grout lines to scrub, and we can do one room or several in the same visit.
That is what the polyaspartic topcoat is for. It is UV stable, so it resists fading and yellowing where a bare epoxy coating would amber over time. It matters most on a long driveway with no shade over it. It is also the reason we keep metallic epoxy indoors and put flake outside. If anyone offers you a metallic pool deck, ask them how it looks after a Yorba Linda August.
Military, veteran, and first responder discounts available. Ask for details.
Garage floors are our flagship, and Yorba Linda has its own page for them. We also coat commercial floors across the city, from shop units and showrooms to warehouse space.
.avif)
One-day garage floor installation. We grind, coat, and finish in a single day. Walk on it in about 8 hours, park on it in about 48 hours.
.avif)
Shop floors, showrooms, and warehouse space across Yorba Linda, CA, coated with the same prep and materials we use on homes.
.avif)
.avif)
.avif)